Попробовали новое обновление QCDR, положительные сдвиги есть, заработал Samsung SATA SH-S223B
Но, всётаки, есть проблемы...
Проверка проводилось на системной плате PEAK-760VL2 (Intel® 915GV, ICH6). CD-RW диск TDK 700MB 4x-12x High Speed.
Привод\Версия QCDR 1.01A 1.01B
Optiarc AD-7173A: +(*) +(*)
Optiarc AD-7200A: - -
Samsung SATA SH-S223B: - +
TEAC DV-W522GMA: + +
* - Эти привода работают, НО с оговоркой, QCDR выдаёт ошибку (QCDR запущен с параметром -Dsense):
QNX CD Recording util QCDR v1.01B
Change priority to 24r
Device vendor: Optiarc product: DVD RW AD-7173A revision: 1-02
SENSE KEY: 5
ILLEGAL REQUEST: Indicates that:
a) The command was addressed to an incorrect logical unit number
(see SAM-3);
b) The command had an invalid task attribute (see SAM-3);
c) The command was addressed to a logical unit whose current configuration
prohibits processing the command;
d) There was an illegal parameter in the CDB; or
e) There was an illegal parameter in the additional parameters supplied as
data for some commands (e.g., PERSISTENT RESERVE OUT).
If the device server detects an invalid parameter in the CDB, it shall
terminate the command without altering the medium. If the device server
detects an invalid parameter in the additional parameters supplied as
data, the device server may have already altered the medium.
ASC: 30, ASCQ: 2
CANNOT READ MEDIUM - INCOMPATIBLE FORMAT
Set write speed to x10(1770 kb/s)...
Current write speed x10(1764 kb/s)...
Sending OPC information...
SENSE KEY: 5
ILLEGAL REQUEST: Indicates that:
a) The command was addressed to an incorrect logical unit number
(see SAM-3);
b) The command had an invalid task attribute (see SAM-3);
c) The command was addressed to a logical unit whose current configuration
prohibits processing the command;
d) There was an illegal parameter in the CDB; or
e) There was an illegal parameter in the additional parameters supplied as
data for some commands (e.g., PERSISTENT RESERVE OUT).
If the device server detects an invalid parameter in the CDB, it shall
terminate the command without altering the medium. If the device server
detects an invalid parameter in the additional parameters supplied as
data, the device server may have already altered the medium.
ASC: 26, ASCQ: 0
INVALID FIELD IN PARAMETER LIST
Starting write process in REAL WRITE mode...
Writing [■■■■■■■■■■■■■■■■■■■■■■■■■] 100% (12422 / 12422) x8.0(1408 kb/s)
Synchronizing cache...
Synchronizing succeeded
Closing session...
Close succeeded
Write disc succeeded
И еще замечено, если первая команда после включения это запись, то ведет себя так-же как и AD-7200A, т.е. вместо начала записи появляется
qnx_ioctlmx(): No such process
Write process failed
qnx_ioctlmx(): Bad file descriptor
C Optiarc AD-7200A вообще плохо. При попытке записи:
QNX CD Recording util QCDR v1.01B
Change priority to 24r
Device vendor: Optiarc product: DVD RW AD-7200A revision: 1.06
Set write speed to x10(1770 kb/s)...
Current write speed x10(1764 kb/s)...
Sending OPC information...
Starting write process in REAL WRITE mode...
qnx_ioctlmx(): No such process
Write process failed
qnx_ioctlmx(): Bad file descriptor
При любых последующих попытках запуска QCDR:
QNX CD Recording util QCDR v1.01B
Change priority to 24r
Device vendor: product: revision:
Internal QCDR error #02
И до перезагрузки привод вообще "мёртв", т.е. ни на что не реагирует.
